| Customization: | Available |
|---|---|
| After-sales Service: | Eastland |
| Application: | Exterior Wall Of Building, Roof, Wall Panel, Shopping Malls, Hospitals, Schools, Apartments |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
EASTLAND ALC Wall Cladding is a steel reinforced Autoclaved Aerated Concrete Panel. It's characterized with steel-reinforced, load-bearing, lightweight, sound insulation, heat insulation, fireproofing, environmental protection, etc. EASTLAND ALC Wall Cladding is also widely used for residential buildings and commercial buildings (shopping malls, hospitals, schools, apartments, villas, etc) and industrial buildings as floor, external wall (exterior wall), internal wall (interior wall), partition wall (party wall), roof, fence and noise wall (sound barrier wall), cladding and lining etc. EASTLAND ALC Wall Cladding has been recognized internationally and has gained the certificates of ASTM for USA, EN for Europe and AS/NZS for
Australia and New Zealand. EASTLAND ALC Wall Cladding can replace traditional precast concrete and clay bricks very well. The Panel can be easily cut, drilled and screwed when installed. Here are the standard sizes and special sizes:
|
Product
|
Code
|
Sizes of Products
|
||
|
Length (mm)
|
Height/Width (mm)
|
Thickness (mm)
|
||
|
Eastland Roof Slab
|
ERP
|
≤2700
|
600
|
100
|
|
≤3500
|
120
|
|||
|
≤4000
|
150
|
|||
|
≤6000
|
200
|
|||
|
≤6000
|
250
|
|||
|
≤6000
|
300
|
|||
|
Eastland Floor Slab
|
EFP
|
≤2200
|
600
|
50
|
|
≤2200
|
75
|
|||
|
≤2100
|
100
|
|||
|
≤2400
|
120
|
|||
|
≤3400
|
150
|
|||
|
≤4500
|
200
|
|||
|
≤5700
|
250
|
|||
|
≤6000
|
300
|
|||
|
Eastland External Panel
|
EEP
|
≤2400
|
600
|
50
|
|
≤3300
|
75
|
|||
|
≤3600
|
100
|
|||
|
≤4200
|
120
|
|||
|
≤5200
|
150
|
|||
|
≤6000
|
200
|
|||
|
≤6000
|
250
|
|||
|
≤6000
|
300
|
|||
|
Eastland Internal Panel
|
EIP
|
≤2400
|
600
|
50
|
|
≤3300
|
75
|
|||
|
≤4000
|
100
|
|||
|
≤5000
|
120
|
|||
|
≤6000
|
150
|
|||
|
≤6000
|
200
|
|||
|
≤6000
|
250
|
|||
|
≤6000
|
300
|
|||
Specific gravity 0.5 Floating on the water.The dry specific gravity of the AAC panel is only 0. 5 because it is one of foamed concrete. As
the above rate is 1/5 of common concrete 1/3 of hollow block, it lightens the self-weight of building, reduces the cost of base and frame,
cuts down the difficulty in process of soft ground sill, and increases the construction quality.
A lot of micro and small air holes that are inside the AAc panel cause multi-function of sound insulation and assimilation. The high precision ofpanel can create a fine air keeping space to supply a silent and comfortable living environment.
Rate of heat transmission 0.11 1/10 of common concrete.A lot of micro and small air holes that are inside of the AAC panel form a static air layer in the material and make the rate of heat transmission of only 0.11W/m K. The function of heat insulation and preservation of the AAC panel is 10 time of common concrete. The function of heat preservation of AAC panel at 125mm thickness is same as 370mm wall of soil-block.
It is world-wide outstan." known of the anti-vibration ability of AAC panel.Only the constructions built with AAC panel are broken lightly at heavy
earthquakes at Osaka/Kobe.The tests in the laboratories of Tongji University and Southeast University in China show that the AAC panel has excellent function of anti-vibration. it's light self-weight of AAC is the main cause, as it allows bigger angular distortion between layers and the allowed changing angle is 1/150.
Panel for wall----Fireproofing in 4 hours.The AAC panel can stand against fire as the low rate of heat transmission. The self of AAC belongs to abio-compound and is not burnable. It doesn't produce nocuousness gas. At Tianjin National.Fixed Anti-fire System Center, it passed the test for fire bearing of 240 min limit.
The AAC panel can bear wind load, snow load and dynamic load
There are following types of the AAC panels:
Outside wall panel
Inner wall panel
Roof panel
Floor panel
The steel ribs inside of AAC panel are arranged by CAd according to loading situation, that the capacity of loading is obtained.
In general, the loads of building are
1.Constant load (incl. self weight and floors)
2. Living load
3. Snow load
4. Wind load
5. The effect of earthquake
){kind=link}